Bud Booster SunBoard w/Heatsink 660 730 IR Emerson Effect 48 LEDs Grow Light DIY

Description

WHEN IT COMES TO GROW LIGHTING,
THE BEST OPTION AVAILABLE IS STRIPS
1) COVERAGE - make it any size/shape you want/even side lighting is possible
2) CANOPY PENETRATION - more leds spread out gets deeper into canopy
3) VERSATILITY - add on or reconfigure any time you want
We at GrowDaddyLEDs.com are committed to helping you
set up your grow with the largest and best selection of strips around.
WE NOW HAVE THREE DIFFERENT
RED BOOSTER
STRIPS AVAILABLE
:
STRIP 1 HAS
:
48 - 660NM DEEP RED LEDs
STRIP 2 HAS
:
48 - 730NM FAR RED LEDs
STRIP 3 HAS
:
36 - 660nm Deep Red LEDs
12 - 730nm Far Red(IR) LEDs
THIS LISTING INCLUDES
:
1 - 30mm x 400mm 48 DIODE BUD BOOSTER STRIP IN THE COLOR YOU CHOOSE
1 - 40mm x 450mm Heatsink
OPTIONS AVAILABLE
:
Optional to have 30mm wide double-sided thermal tape pre-applied to strip for easy installation (strong and good thermal conductivity) so all you have to do is peel the release paper and stick it on
CLICK HERE FOR THE STRIPS WITHOUT HEATSINKS
EACH STRIP
:
24V
24w maximum
900Ma maximum
2 - DUAL CONNECTORS (easier to wire in series and/or parallel)
2oz RA Copper
EXTRUDED ALUMINUM HEATSINKS
:
40mm x 450mm x 10mm each
Over half a pound each
This is for a 30mm x 400mm Sun Board Booster Strips with a hefty 40mm x 450mm heatsink and the option of thermal tape pre-applied.
Not only does it hold strong, it also helps transfer the heat from the board to the heatsink.
These have the hook-ups on each end of the board making it so much easier and less messy to wire them in series.
They are rated at 24V and 600-900mA per strip
and can put out up to 24 watts of red boosting power to make your buds the best they can be
.
If you wire 2 of these in parallel, you can then wire them into a series of the lm561c or lm301b or h strips or even the blue booster strips and run them all on the same 1400mA or 1750 mA constant current driver. They do work the best on a constant current driver.
This is for ONE STRIP and heatsink with the option for pre-applied thermal tape.
Anything else in the pics is for reference and not included. It just shows you a little of what can be done with these strips. Only your imagination can stop you.
Check out my other listings for separate strips, different spectrums, mixed sets, sets with heatsink(s), blue booster boards, UV boards, etc. If you need a different quantity, custom configuration, complete DIY kit for a custom light, just send me a message or give me a call. We always have DISCREET SHIPPING and this is a private listing, so your purchase will remain anonymous on eBay.
What you get is in the description. Some photos may be stock or show other items for reference only. If you have a question, please ask before purchase.
IF YOU NEED MORE THAN QUANTITY LISTED, JUST MESSAGE ME AND I WILL INCREASE IT FOR YOU